Page 113 - Softbound_Edition_19_en

Solenoids Solenoid accessory
Solenoids

ABMESSUNGEN 2 3 4 5 6 7 8
1
Amplifier with analogue interface MP.60/31x72
91.5 MPS45/23x50 MPS35/19x50
ELECTRICAL SPECIFICATIONS 72.5
Protection class IP 67 acc. to EN 60 529 Dither Frequency adjustable 4…500 Hz A 72.5 A
Supply voltage 8…32 V Factory setting 80 Hz
Residual ripple < +/-5 % Level adjustable 0…400 mA
Fuse low Factory setting 180 mA
No-load current approx. 20 mA Temperature drift <1 % at ∆T = 40 °C 31 38 60 79 23.09 45 64 32 19.03 35 54
Max. current Digital inputs 1 input high-active, no pull-up/down 39

consumption No-load current + 2,5 A per solenoid Switching threshold high 6...32 VDC
Analogue input 1 input non-differential Switching threshold low 0…1 VDC 50 50
Voltage / current (switchable by means of parameter) Usable as frequency input B 70 53 53 B
0...+/- 10V or 0/4...20mA (frequency 5...5000 Hz) and as PWM input 72
Resolution 10-Bit (automatic frequency recognition)
Input resistance Voltage input >100 kΩ Ramps Adjustable 0…500 s 72.5
(Input current < 5 mA) 72.5 USB interface Via digital input
Load for current input = 124 Ω Requires the Wandfluh USB adapter 1 braun ↓ ↓ ↓
Stabilised output 5 VDC EMV 2 grün
voltage max. load 20 mA Immunity EN 61 000-6-2 C 3 weiss Valve side Valve side Valve side C
Solenoid current: Emission EN 61 000-6-4 4 gelb
• Minimal current I Adjustable 0…I max mA 54 64 5 grau
min
Factory setting 30 mA 32 Ø 19.03 35 39 23.09 45
Adjustable I …2450 m A
Ø
• Maximal current I max min
MP35/19x50-..-12, Factory setting 1360 mA CONNECTOR ASSIGNMENT
MP35/19x50-..-24, Factory setting 680 mA Connection cable
MP45/23x50-..-12, Factory setting 1490 mA 50 1 brown
MP45/23x50-..-24, Factory setting 780 mA 53 50 D 2 green 1 = + VCC D
MPS60/31x72-..-12, Factory setting 2290 mA 53 3 white 2 = Command value
MPA60/31x72-..-12, Factory setting 2290 mA 4 yellow 3 = Dig Inp
MPS60/31x72-..-24, Factory setting 1140 mA 5 grey 4 = Stab out
MPA60/31x72-..-24, Factory setting 1140 mA 5 = GND
Kanten nach ISO 13715 Oberflächenbeschaffenheit
BLOCK DIAGRAM +0.4 -0.1 -0.3 Ra 3.2 Allgemein- toleranzen ISO 2768 Längenmasse, Rundungen,Fasen m Auszug Allgemeintoleranzen ISO-2768-1 >30-120
Winkel
>6-30
>3-6
>0,5-3
m Nennmass
H
Geradheit, Ebenheit
±0.3
±0.1
±0.2
Rechtwinkligkeit, Symmetrie
H Längenmasse
±0.1
START-UP ADDITIONAL INFORMATION Rundlauf,Planlauf H Radien, ±0.2 ±0.5 ±1
Hüllbedingung nach ISO 14405 E
Fasenhöhe
Material:

Wandfluh documentation-
E Information regarding installation and commissioning are contained in 01 02.07.2015 BEH Typenbezeichnung richtiggestellt Gezeichnet 12.11.2014 BEH RP E
Geprüft
24.11.2015
BEH
Variante MP60 hinzugefügt
02

brown X1-1 1 brun Rev. 17.11.2015 Name Änderungsnr. Änderungsbeschrieb Freigegeben M 1:1 24.11.2015 BR
Serie freigegeben
Datum
+VCC the information leaflet supplied with the amplifier electronics and in the Wandfluh electronics general register 1.13 Ersetzt durch: Gewicht
Magnetspule komplett
0.880 kg
2 vert
Ersatz für:
operating instructions. MP../..x..-P1-..-.. Dok.-Nr. 0164148 Format
A2
3 blanc Proportional spool valve Dokument darf ohne schriftliche Einwilligung weder kopiert, Art.-Nr. DB 1.1-330 Revision
register
1.10
02
verwertet noch an Dritte weitergegeben werden.
4 jaune
register
2.3
Additional information can be found on our website: 4 Proportional pressure valves Zuwiderhandlung ist strafbar und wird gerichtlich verfolgt. Blatt 1 von 1
1
C:\00_Wandfluh\Verkauf\Dokumentation\Reg1.1\0164148
2
5
3
5 gris
«www.wandfluh.com» Proportional flow control valves register 2.6
grey X1-5 Free-of-charge download: ACCESSORIES
GND USB-adapter PD2 Article no. 726.9900
• «PASO-PD2» Parameterisation software
• Operating instruction (*.pdf) incl. USB-cable type A-B, 1,8 m
Internal Solenoid (for parameterisation via PASO)
supply Supply PWM
Stabilised yellow X1-4
output PARAMETER SETTINGS
The PD2 electronics have push-buttons and a 7 segment display which enable setting the most important parameters. In addition, the digital in-
A/D put can be used as a communication interface, through which, by means of the parameterisation software „PASO-PD2“, the complete paramete-
risation and diagnostics can be carried out. For this, the Wandfluh USB-PD2 adapter is required. (not included in the delivery)
green X1-2
Analogue input Attention: During the communication, the digital input cannot be used.
Voltage or current A/D
FUNCTION DESCRIPTION
white X1-3
Digital input
Command Command Solenoid output
value scaling Fixed Ramp Valve type Solenoid
command
Adapter Push-buttons 7 segment values generator driver Current measurement
USB-PD2 FLASH display
RAM
DigInp DigInp DigInp DigInp
PASO / USB
Error Number Enable Solenoid Enable Error
Wandfluh AG Tel. +41 33 672 72 72 E-mail: sales@wandfluh.com Illustrations not obligatory Data sheet no. Wandfluh AG Tel. +41 33 672 72 72 E-mail: sales@wandfluh.com Illustrations not obligatory Data sheet no.
Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.1-330E 2/7 Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.1-330E 3/7
CH-3714 Frutigen Edition 21 20 CH-3714 Frutigen Edition 21 20
Page 113