Page 110 - Softbound_Edition_19_en

72.5
72.5
1 braun
2 grün
3 weiss
4 gelb
5 grau
64
54
Ø 19.03
23.09
Ø 32
45
35
39
50
1 brown
50
53
2 green
53
3 white
4 yellow
5 grey
1 brun
2 vert
3 blanc
4 jaune
Solenoid accessories Solenoids 5 gris
Solenoid accessory
DIMENSIONS APPLICATION POSSIBILITIES Solenoid coil acc. to VDE 0580
• With integrated amplifier electronics PD2
2 U I • Protection class IP 67
12.4 Ein 2 I
28 18 Einsatzbereich
1 2  2
12.4
28 18 t 1
Aus

1 1 DESCRIPTION FUNCTION APPLICATION
1/2 Solenoid coil with integrated amplifier electro- The electronics has a Pulse-Width-Modula- Due to its water spray resistant execution, the
nics. Protection class is IP67. The electronics ted current output. The solenoid output can solenoid coil is suitable for most diverse ap-
t are fix mounted on the solenoid coil. The con- also be parameterised for switching solenoids. plications.
ca. 250ms struction corresponds to standard VDE 0580. The parameterisation is carried out directly It can be used on all proprtional valves with
The steel housing is zinc nickel coated. on the device by means of push-buttons and 19 mm, 23 mm resp. 31 mm armature tube
display, or by means of the parameterisation diameters.
 Switching operation at nominal and diagnostics software „PASO” of Easy connecting enables assembly and com-
power, with subsequent power reduction. Wandfluh. missioning with conventional tools. All settings
- reduced heating of coil
- extended service life of solenoid can be carried out easily and quickly.
F1
T
26.5 - shorter disconnection time 1
 Switching at elevated nominal power or overvoltage.
+ For optimum design, please contact us.
T
F1
26.5 - - powerful straight-through switching 1 TYPE CODE
- shorter switching time 2 M P - P 1 - - #
+
U: Supply voltage of the power reduction plug
-
3.5 M3 I: Current consumption of the solenoid 2 Metal housing square
28 Integrated amplifier electronics
3.5
2 M3 48 Coil execution
12.4 28 Square 35 mm S35/19x50 Square 60 mm S60/31x72
S45/23x50
Square 45 mm
A60/31x72 *
Square 60 mm
28 18 48
 START-UP Connection cable
1 vaway from the solenoid
(This data sheet is attached to every power reduction plug)
A back-up fuse (5A, quick break) is recommended.
The yellow LED status display shows that the plug is energised. 1-solenoid execution
The plug can also be mounted rotated by 180°.
Nominal voltage U N 12 VDC 12
24 VDC 24
CONNECTION ASSIGNMENT Analogue input voltage / current (0...5 V factory preset) A1
CANopen acc. to DSP-408 C1
with J1939 J1 (on request)
brown +VCC
blue GND Design index (subject to change)
yellow-green PE
* only for proportional spool valve NG10
GENERAL SPECIFICATIONS
Connections Connection cable 5 x 0,34 mm , Exterior coating PVC
2
length = 1,5 m
USB interface via connection «Digital input»
requires the Wandfluh USB adapter PD2
If the valve is operated to its limit values (pressure, flow), it is possible Dimensions See drawing page 3
T
F1
26.5 that the holding current of the plug is not sufficient to hold the valve 1 Ambient temperature -20...+85 °C
completely open.
In this case, power reduction cannot be used.
+
-
SAFE OPERATION
2 Caution: To avoid overheating the coil may only be energised when Note: For maximum power development the coil has to be installed in
mounted on an armature tube and valve. its preferred direction. A reversed installation can lead to lower hydrau-
lic values.
3.5
M3
28
48 Wandfluh AG Tel. +41 33 672 72 72 E-mail: sales@wandfluh.com Illustrations not obligatory Data sheet no. Wandfluh AG Tel. +41 33 672 72 72 E-mail: sales@wandfluh.com Illustrations not obligatory Data sheet no.
Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.1-325E 2/2 Postfach Fax +41 33 672 72 12 Internet: www.wandfluh.com Data subject to change 1.1-330E 1/7
CH-3714 Frutigen Edition 15 48 CH-3714 Frutigen Edition 21 20
Page 110